How to restore the smoothness of laminate floor

 Real wood floor

Real wood floor is in when maintenance, must pay attention to adhere to the dry floor, clean. General, floor moisture content holds to 8 ~ 13% commonly, such floor is below normal condition, won't present a problem commonly. But laid and apply undeserved also can form the solid wood ground

Board quality problems, such as laying did not do moisture-proof treatment; Wet with water or scrub with lye or soapy water, which will damage the brightness of the paint. The toilet and the room floor did not do a good job of barrier; Summer did not pay attention to pull the curtain, making the window floor after the hot sun exposure discoloration cracking; Or it is air conditioning temperature is opened too low, make a change of difference of temperature in day and evening is too big, cause floor swell or shorten to the acuteness and form out of shape craze to wait.

In the process of using the floor, if a single floor is found warped or falling off, the floor should be picked up in time, shoveled away the old glue and ash, coated with new glue, compaction; If the film of single floor paint is broken or show white, usable 400 water sandpaper dips in soapy water burnish, brush clean next, after waiting for dry, undertake part complement color, after color is dry, brush besmear a paint again, dry 24 hours after, polish with 400 water sandpaper, brush wax to undertake polishing next. 

 Solid wood composite floor

The maintenance and maintenance of solid wood composite floors are related to the solid wood floor. It is much simpler and should pay attention to the following points in daily use and maintenance:

1. Adhere to the floor dry, clean, do not allow to use dripping mop floor, or with alkaline water, soapy water to wipe the ground, to prevent damage to the luster of the paint appearance; If the air in the home is dry, the mop can be wet a few or put a basin of water on the central heating or humidify with a humidifier.

2. Try to prevent sun exposure, to prevent the appearance of paint for a long time in the ultraviolet light under the early aging, cracking;

3. Part of the board surface accidentally 5 accounts for stains should be removed in time, if there is oil, can be dipped in a rag with warm water with a few washing powders to scrub, if drugs or pigments, it is necessary to be at the end of the stains seepage such as wood surface had to be removed;

4. The floor as far as possible to prevent and water touch for a long time, especially can't touch with hot water, thus, once there is hot water sprinkled on the floor, want to dry in time;

5. Had better hit a wax every three months, before waxing the besmirch of floor appearance should be sorted out clean. In fact, do not play can also, but often wax, can adhere to the floor smoothness and extend the floor's service life.

6. Do not throw cigarette butts or place things too hot on the floor. Try to prevent dragging heavy furniture.

 Aggrandizement wood floor

Of aggrandizement wood floor apply to maintain more brief, need notice only in daily use the following a few, can assure the normal use of the floor.

1. All ligneous floors can increase or decrease along with the humidity of the environment or temperature alters its moisture content, affect floors state to shrink. The reason should resemble maintenance skin is same, the reason that holds to the floor contains water army.

2. Floors usually do not need wax or paint. Do not use sandpaper to polish.

3. It is recommended to place a pedal mat at the door to prevent dust particles from being brought in and damage the floor.

4. Floor surface stains and oil stains please use household cleaner for cleaning, do not use a lot of water to clean the floor.

5. In the boring area in the north, we should pay attention to adding the humidity of the floor appearance in winter. We should mop the floor with a wet mop and appropriately increase the surface humidity, which can effectively solve the cracks and cracks of the floor. If cracking occurs in a single position, please inform the selling unit in time and add to the part. After filling, add surface humidity appropriately to facilitate the recovery of the floor.

6. During the rainy season, please close the windows to prevent rain.

7. Please pay attention to the maintenance of heating, air conditioning, and other indoor equipment to prevent water leakage from soaking the floor. If discover floor bubble water, should tear down the floor that immerses in water as soon as possible, dry in the shade or tell to sell a unit to undertake processing in time.

8. Toilet and kitchen door, should pay attention to the timely arrangement of water.

9. Please do not drag the elbow. It is better to lift it. When cleaning the wood floor, get rid of the dust of floor appearance with mop first, the proportion that clarifies and floor according to cleaner next smudgy degree, dilute right amount in a bucket of water, soak mop, drag the ground toward the direction of the doorway from inside the room. But want notice, want mop twist as far as possible, to prevent overmuch moisture to permeate the layer inside wooden floor, form moldy, decayed. If encounter floor seams or the place that the corner waits for not easy to arrange, can dip in with old toothbrush floor cleaner is rinsed directly, also can wash cleaning agent to be swabbed on a dishcloth to the ground. Nevertheless, the interface active agent concentration in some floor cleaners is higher, after dragging the ground, half wet ground is infected with dust more simply instead. Accordingly, had better choose the floor clean product of high grade.

I want the floor to hold to burnish for a long time to shine brightly, after applying floor cleaner, still can go up again wax of floor of a woodiness. Must wait for the floor to dry thoroughly however waxed again, prevent wax layer cannot be adhered to thoroughly, and make the white spot that appears on the floor bit by bit. One, use the flat ground to drag to clean the dust on the floor. This is the same as what I see abroad. They also use flat floor towing. The slight difference is that they use a coarse fiber, concave feel very strong wipes, and with adsorption of the product used together. The specific method is: will be boring woolen wipes clip-on flat ground drag, in wipes spray a few dust adsorbent, then swabbed the floor appearance, hair and dust will be absorbed to woolen wipes. After the end, take off the wipes, clean them in the pool, and dry them in the sun.No cleaning agent is required throughout the process. Because no matter apply which kind of cleaner, can make floor appearance loses luster more or less ground.

Two, floor cleaner. Concern floor cleaner, do not have an especially suitable family to operate all along, and the cleaner that applies on real wood floor appropriately (mostly cleaner demand uses water to dilute, demand cooperates relevant equipment). As a result, floor cleaner is mainly applicable to acid and alkaline and water immersion insensitive projects on the ground, for example, the plastic floor.

Three, floor wax. After reading the "product clarification" of floor wax, most customers will get such a conclusion: once the use of floor wax, you can reach: cleaning, maintenance, glazing, maintenance, correction, and other aspects of the role. Tell accurately, the primary action that the floor waxes depends on maintenance. Because of the continuous enhancement of the floor's own maintenance function, such as laminated flooring or laminate flooring, the demand for maintenance function is now close to zero. Need only real wood floor to still have the demand that maintains respect. Like clean action, oneself think: the floor that had played wax is far more difficult than the floor that had not played wax is much; As for the maintenance and correction function, it is the effect of natural maintenance wax and correction products, which is not the function of the general floor wax.

Four, to clean with water. Such an approach would certainly do no good but harm. Nevertheless, most the family that the shop has finished wooden floor chooses to use the person that holds the clean company to do clean. No way, also know that these cleaning companies with a wet mop cleaning method are not good, but convenient ah. Just ask them when you've learned a better way. Scrub with a dry towel. This kind of method is attributed to the people that have a special liking for the real wood floor. Most of them take care of floor maintenance. Nor is it intended for everyday cleaning. Specific measures more cumbersome, here will not be described in detail. Six, use vacuum cleaner cleaning. Because of the brush head of vacuum cleaner, ideal effect arrives hard when the edge seam of clean real wood floor, the person that applies this method for a long time is not much. Above first is to aim at the clean method of the dust of real wood floor exterior. So, if the floor appearance has hard dirt, how will we clean it? Combine several common hard scales. Here is a brief introduction: The perennial collection of hard dirt (also includes the hard dirt in the floor groove seam), according to the hard dirt situation, choose the floor decontamination products with grinding effect for implementation of cleaning. Customers need to pay attention because the operation moves from light to heavy and gradually exertS force to prevent unnecessary scratches. The only careful operation, will not form scratches on the floor appearance. The residual wax of floor appearance, because the craft of domestic production wax is more backward, general home-made wax stays in-floor appearance to be able to present the phenomenon of anti-black hair pollution for 3 months, especially after using water clean, it is the feeling of fog often, the feeling is permanent clean does not come out. Make the floor seriously tarnish. Given this situation, we can choose household wax products and clean them. 

Maintenance: 1, adhere to the floor dry, clean, prevent, and a lot of water touch. Do not use alkaline water, soapy water, and other corrosive liquids to scrub, to prevent damage to the paint film. Scrub with a wrung cotton mop; In case of stains with steel velvet friction, do not use a wet mop, gasoline, flammable goods, and high-temperature liquid for scrubbing.

2, every time a wax (laminate wood floor wax at the interface), time interval depending on the finish of the floor paint surface. The method is to use a semi-dry rag to clean the floor and wax. Want to alter evenly in-floor appearance and make its "permeate". Wait for a little dry, with a soft dry cloth on the floor to scrub back and forth, until smooth and bright stop.

3, if not careful watering on the ground, it is necessary to use a dry soft cloth in time to wipe clean, wipe clean can not directly let the sun exposure or use electric oven baking, prevent boring too fast, dry floor crack.

4, the floor after the shop installation should be as far as possible to reduce the sun directly insolate, prevent paint by ultraviolet light shine too early dry crack and aging.

5, do not put cigarette butts or matches and other kindling easily thrown on the floor, to prevent burning the floor appearance. Prevents sharp, sharp objects from scratching or being weighed down by heavy objects for a long time.

6, the paved floor such as long time not living, do not use plastic cloth or newspaper cover. Time a long film will be sticky, lose luster. Do not use a very high-temperature object to touch the floor.

7, just laid the floor should often open the window ventilation, on the one hand is to indoor air fresh, on the other hand is to emit moisture.